This blog is beneficial for those who are using the wireless network that only supports WPS connection. If you are among those users, just go through the steps and setup your extender device through the WPS button.
Here are the steps for settings up of the wifi extender setup through WPS button
Step 1: Hold or press the button for the WPS for the time interval of 5 seconds kindly check that the front light on your device must blink.
Step 2: After the time interval of two minutes, press the button of the WPS on your router, wireless gateway or the wireless router device. After this just wait for the time interval of two minutes during which the extender device will connects with your existing wireless network.
The green light on your device, will indicate you that you have successfully done the procedure for the WPS.
Step 3: In case, you are the user of the extender which runs on the frequency of 5 GHz from my wifi ext net, then you will need to repeat the steps 1 and step 2 and make the connection of your extender to the frequency of 5 Ghz. If you will be successful in this procedure, then you will see the link rate LED light on your extender device.
After the accomplishment of the complete procedure, the applicable device will always broadcast the network name which is by the name of the “network name_2GEXT” or the network having name “network name_5GEXT” you can easily connect with the same network by adding the details of the password as you are submitting earlier.
If you find that our blog is very much informative for you just like our facebook page. If you are having any idea regarding our website just comment below