wifi network manager Netgear_ext Archives

From this blog, you will have the guidance which is related to the changing of the wireless settings of your netgear PR2000 device. One thing you must keep in your mind is the password which is same while you have bought your device.

Here are the steps for changing the wireless settings of your netgear PR2000 device

Step 1: For checking the details regarding the default settings of the wireless device, just have a look to the back of the label of the product. You have the details just like the image we have shown below.

Step 2: In case you want to change the settings for the Netgear travel router wireless or just want to simply verify the current network name and passphrase, you need to connect a wired computer to the LAN port (the Yellow port) of the PR2000.

Step 4: Using the web browser from your computer, just open the website which is http://www.routerlogin.com or you can visit to the website which is http://192.168.168.1 into the address bar of your browser.

Step 5: After the successfully loading of the page which is www mywifiext net login, you will be asked to enter the details of the user name and the password into the field that are required to enter both of the details.

mywifiext net setup

Step 6: Move to the tab of the basic and click on the option of the wireless.

Step 7: On the main part of the web page, you will have the option through which you can change the settings for your travel wireless network and the details of the passphrase.

www.mywifiext.net

Step 8: By clicking on the option of the apply all of the settings that you have changed will be saved successfully.

Here is the step-by-step process that allows to set up the Netgear

WN3000RPv3 Wireless Range extender by using the WPS button.

First of all, you need to place your extender in the same room as in which your Wi-Fi router is placed.

Then make sure that your router is WPS capable and you have an internet connection coming from the main router.

In the next step, plug the extender into the electrical outlet and then wait for at least 30 seconds for the power LED to become solid green. If the LED does not glow, then click on the ON/OFF button on the side panel of your extender. You can also visit www.mywifiext.net for more information regarding the Netgear WN3000RPv3.

After that, you have to press and hold the WPS button on the extender for at least 5 seconds. This makes the WPS LED to blink.

Press the WPS button on your router within the 2 minutes.

After that, you have to move the extender to your preferred location but to get the good signals to make sure that the extender is in between the router and the wireless devices. Please check the website www.mywifiext.net for more information.

You can also connect to the Extender’s new SSID using your wireless devices. The extender wireless network name (SSID) has now changed to the new network name that has _EXT at the end.