Internet is very much important and if you are using the internet for the first time, then you must be need to configure on your device which may be PR2000 device. If you have recently bought your device PR2000, then you may need steps for configuring your device for using the internet for the first time.
In this blog, you will learn about those steps that will help you in configuring your device.
Step 1: Check for the internet connection which must be active and you must be getting the internet connection through the Ethernet port only.
Step 2: Make the connection of the one end of the Ethernet cable along with the one end of the device for your mywifiext login and other end with the internet provider.
Step 3: Now, slide the switch of the device to the position of the wired.
Step 4: Attach the device PR2000 to the wall outlet and wait for the time interval of 30 seconds.
In case you are using the computer which is having the wired connection and check that they must be plugged in into the LAN port of the device PR2000 safely.
Step 5: Make the connection of the device PR2000 through the wired connection or the wireless connection.
From your computer, just scan for the wifi networks. Connect with the default wireless network name and make the connection with it by entering the details of the password. You can check for both of the details from the back of the label of the device which is next to its serial number and the MAC address.
Step 6: Using your computer or the smart device, just start the web browser and enter the web address into the address bar which is http /www.routerlogin.net or visit to the website which is http /192.168.1.1